2732
GEN 3 Verve & Verve Pro Scooter Interface
The Verve and Verve Pro models are equipped with an LED display which highlight your:
- Boost Levels 1, 2, 3
- Walk Assist Mode
- Fault indicator with In-App Troubleshooting
- Speedometer
- Battery Level
- Bluetooth connection to the Gen3 Verve App
- Headlight & Taillight
- Cruise Control
To power the scooter on/off, press and hold the Power button for 3 seconds.
To cycle trough the three boost levels and the walk assist mode, press the Power button.
To turn the headlight & taillight on/off, tap the Power button twice.
GEN 3 Verve & Verve Pro Scooter App
The Verve and Verve Pro models have Bluetooth chipsets allowing them to connect to the GEN3 Verve App on iOS and Android giving access to:
- Current Speed
- Toggle Between mph and km/h
- Lock and Unlock the Scooter
- Boost Level
- Odometer
- Headlight & Taillight
- Trip Distance
- Self-diagnostics with Curated Troubleshooting Steps Displayed In-App
To pair your scooter with the GEN3 Verve app, first make sure your scooter is turned on. Keep your phone and scooter close by and tap on the Bluetooth icon in the top left corner of the app’s main page. Select “Verve ####” or “Verve Pro ####” to pair your scooter with your phone.
