HOW DO I TURN MY EBIKE ON / OFF?

Your bike will turn on at the display, by pressing and holding the "M" button to the left of the screen.

The Groove fat tire folding bike, has one extra step:

• If you find that the display doesn't turn on; check that your key in the battery is turned to the "ON" position (If the battery is in the OFF or Unlocked positions the bike will not function)

WHAT DO THE DISPLAY BUTTONS DO?

Your display buttons have multiple functions:

• "M" (Mode) = Power on/off (press and hold)
  Secondary: Odometer, trip distance and trip time (quick press)
• "+" (Up) = Raises the pedal assist level (quick press)
  Secondary: Turn light on/off (press and hold + button for 2 seconds) 
• "-" (Down) = Lowers the pedal assist level (quick press)
  Secondary: Walk-assist (press and hold - button for 2 seconds, continue holding while using function)

HOW TO CHANGE SETTINGS:

• "+ & -" = (Press and hold) To enter "General settings"
  (Quick press) "M" to switch between St.1, St.2, and St.3 (confirm/exit by holding "M" until setting screen closes)
• "St.1" = Reset trip distance (Y or N)
  Choose selection with assistance buttons and confirm/exit by holding "M" until setting screen closes
• "St.2" = LCD backlight brightness setting (1, 2, or 3)
  Choose selection with assistance buttons and confirm/exit by holding "M" until setting screen closes
• "St.3" = Mph or Kph
  Choose selection with assistance buttons and confirm/exit by holding "M" until setting screen closes

PASSWORD SET-UP / ACCESS:

• Skip to last picture/page of interface display operations

Please contact us if you have any further questions!